CALIBRATORS

Yokogawa continues to grow its calibrator line, from pressure, T/C, RTD, Volts, Amps, Frequency, and now introduces the Process Calibrator: CA450.

Our high accuracy calibrators work with all competitor products and offers the customer a way to maintain their equipment, while keeping the specifications of their process.

  • Filter
Category: CALIBRATORS

Signal source: DCV, DCA, Resistance, RTD, TC (10 kinds), Frequency, Pulse Measurement: DCV, DCA, ACV, Resistance, RTD, TC (10 kinds), Frequency, Pulse Features: Simultaneous signal source and measurement capacity, a wide array of useful functions, Easy operation, Online communication function Options: AC adapter (94012: For 100V AC, 94013: For 120V AC, 94016: For 220-240V AC), B9108WA RJ sensor, B9108XA Accessory carrying case, 91017 Communications cable

Category: CALIBRATORS

Signal source: TC (10 kinds), RTD, DC100 mV, 4000Measurement: TC (10 kinds), RTD, DC100 mV, 4000Features: Selectable RTD (Pt100 or JPt100), Built-in RJCOptions: CA12E-2 Includes rubber boot, strap and accessory case

Category: CALIBRATORS

The Yokogawa CA450 Process Multimeter is a portable test instrument to combine a digital RMS multimeter and a loop calibrator to give process technicians the same functionality in one tool. The Yokogawa CA450 provides 24-Volt loop power, reducing the need for carrying a separate power supply when performing transmitter testing. And with its built-in, selectable 250-Ohm Hart resistor, it also eliminates the need for a separate resistor. Process technicians can now do the same job while carrying less equipment.

Category: CALIBRATORS

The CA700 Pressure Calibrator has a basic accuracy of 0.01% of reading on pressure measurement and 0.015% of reading on Current/Voltage source/measurement, which makes it the most accurate calibrator in the portable calibrator class. The CA700 also has the highest resolution and widest range of any hand held portable in its class with resolution of 0.001 kpa (200.00 kpa range) and a resolution of 0.0001 psi (29 psi range). The CA700 supports "As Found", "As Left" data and error rate (%). In addition the CA700 stores calibration procedures for pressure transmitters and pressure switched which allow strong support for field calibration and maintenance work. The CA700 is housed in a robust IP54 dust proof and water proof case for use in harsh environments. Available in three model ranges which includes low pressure, medium pressure or high pressure with selectable high-performance hand pumps for each range.

Category: CALIBRATORS

Voltage Calibrator - Current Calibrator Signal source: DCV (Max. 30V), DCA (Max. 24 mA) Measurement: DCV (Max. 30V), DCA (Max. 100 mA) Features: Auto step (4 to 20mA), 20mA SINK, Sweep function Options: CA11E-2 Includes rubber boot, strap and accessory case

Category: CALIBRATORS

Signal source: DCV, DCA, OHM, RTD, TC (10 kinds), Frequency, PulseMeasurement: DCV, DCA, OHM, RTD, TC (10 kinds), Frequency, PulseFeatures: Highly accurate within 0.02% of the DC voltage range for source and measure.Source and measurement can be performed simultaneously.Vertical type with large-screen display.Loop power supply function (24 VDC at a load of up to 22 mA)It is possible to measure current in the mA range while supplying power.Sink function.Sweep functions that allow 3 types of continuous outputs.Options: 94010 AC adapter, 94015 NiMH Battery, 93027: Main Body case with strap

Category: CALIBRATORS

YPC4000 is a combination Calibrator / HART Communicator that reduces the time spent on field calibrations and the number of test instruments that have to be carried into the field. The YPC4000 Series delivers the versatility of a modular calibrator and the convenience of HART communications in one handheld unit. Users can view up to four measurements simultaneously on the high resolution LCD or compare HART PV and AO values to corresponding values measured. Available sensor modules include a variety of differential, gauge, vacuum and absolute pressure as well as voltage, current and temperature. A voltage and current meter is integral to the base unit. All HART field devices can be configured, polled, and trimmed using HART communications. Device Specific commands for more than 200 supported devices, including EJA/EJX pressure transmitters, YTA Temperature Transmitters, and Yewflo are available. *This product is handled by YOKOGAWA CORPORATION OF AMERICA in US. Please contact through your local Yokogawa's representative.