Clamp meters

 

 

 
  • Filter
Category: Clamp meters

All kinds of Taiwanese Clamp meters. Latest range.  

Category: Clamp meters

      True RMS 3000A Voltage Measurement (AFLEX 3002 only) Fast Peak Function(30 μs) MAX/MIN Auto-Power-Off:30 minutes Flexible probe, different from normal clamp meter, can pass through obstacles at will and wind many conducting wires simultaneously, max. diameter 170mm   AC Current (45~65Hz,True RMS) Range Range Resolution Accuracy of Readings 30 - 300 A 0.00 - 300A 0.1A 1% of range 300 - 999.9 A 100.0 - 999.9 A 0.1A 1% of range 1000 - 3000A 1000 - 3000 A 1A 1% of range AC Voltage (AFLEX 3002 only, 45~65Hz, True RMS) Range Resolution Accuracy of Readings 3 V - 600 V 0.1V ± 0.5% ± 5dgts General Specification Connector Diameter 23mm Cable Diameter 14mm Cable Length from Probe to Box 170mm Conductor Size 170mm (approx.) Battery Type 1.5V SUM-3*2 Power Consumption 10mA (approx.) Auto - Power - Off 30 minutes LCD update rate 2...

Category: Clamp meters

All range of Hioki clamp from Japan.

Category: Clamp meters

All kinds of AEMC Clamp meters. Latest range.  

Category: Clamp meters

From Japan AC Current/Voltage, Frequencies, Resistance, Conduction check, Temperature (probe sold separately) Wave peak value, Waveform distortion check Auto-power off to prevent the power from being left on Non-fuse type protects up to 600 V AC 1000 A AC Ø 46 mm

Category: Clamp meters

The new flexible current probes make your measurement possible where the space is too tight or difficult for clamp meters. Center 26 is composed of a 8.5mm, double-insulated flexible sensor and a True-RMS electronic module with back-lit LCD for accurate and clear reading in all environments. Measurement range from 1 to 3000 A ac, available in 10" and 18" length probe.

Category: Clamp meters

Plug into multimeters, oscilloscopes, or power analyzers to measure AC current, up to 3000 A ac. This is also ideal for commercial or residential users who have standard clamp meters, but need to reach hard-to-clamp-on places, or occasionally measure AC current higher than 400 or 600 A. Center 25 simply eases your work.

Category: Clamp meters

This is a perfect instrument for diagnostic and maintenance purpose in associate with low current monitoring or troubleshooting. It measures both AC and DC current with very stable 1 mA resolution. It is an ideal choice not only in general industrial filed, but also automotive application to measure sleeping or starting current. The built-in backlit LCD and bright LED flashlight make it easier to work under the hood. Features:  1mA resolution Thin jaw profile for easier wire measurement TRMS for all applications LED working light Backlit LCD 600V CATIII