Well done, KKInstruments!
We managed to monitor our production process effectively with your expertise! Will buy again!
Our company prefer to source measuring instruments only from KKInstruments because they have a wider range of products and show a high standard of expertise. We are very happy with the deal. No regrets for choosing KKInstruments for the past 8 years,
Your cart is empty
For customer service:
Email: Sales@meter.com.my
Contact offices:
Johor Office (New 5000 square feet HQ):
Suite 1, R floor (13th), Wisma Singlong, 9 Jln Zabedah, B.P 83000,Johor,MY.
Tel(Johor) : +607- 4352540, 4355540
Fax: +607-4347299
KL/PJ Office:
207, Lvl 2, Blok B3, Leisure Commerce Square, Jln PJS8/9, 46150 Petaling Jaya, Selangor, MY. (Kurnia Insurance Building, Sunway)
Tel(KL) : +603- 78762460, 78762463
Fax(KL): +603-78762454
Penang Office:
Tel(PG): +6016-5505065
Office Hour:
Mon-Fri 9am to 6pm
Sat 9am to 1pm
Closed on Public Holidays
Yokogawa’s Portable and Handheld Instruments offer a broad range of portable test equipment to fulfill numerous short-term or continuous measurement application requirements. Included in our wide range of products are: Calibrators, DMM, Clamp-on Testers, Portable Power Monitors, Portable Data Loggers, Insulation Testers, Thermometers, Portable Analog meters, Light Meters, Precision Measuring equipment, and more.
Model 2755 measures resistances from 1 Ω to 10 MΩ by operation of dials and switches. Batteries and a galvanometer are self-contained. The front control panel is provided with power and galvanometer circuit selectors, one ratio arm, and four measuring dials. Model 2755 is also equipped with a Murray and Varley Loop Tester for convenient location of line faults such as "shorts" and "grounds" in power, telephone, telegraph, and signal cables. No auxiliary attachment required Galvanometer with a built-in protection circuit Compact, lightweight (2 kg) Built-in Murray & Varley loop tester
Laboratory-grade accuracy ±0.03 to ±0.05% Quick readout without error Excellent long-term stability: The resistance elements are made of selected manganin wire, stabilized by both artificial and natural aging after being wound. Perfect guard system Stable measurement: The dial switches offer low contact resistance and little change due to aging, giving stable operation. Inner/outer contact type plugs are used for changing the multiplication factor, assuring little change in the resistance due to reinsertion of plugs. Built-in standard resistors Bar resistor measurement
Model 2768 is a Precision bridge used for the exact determination of resistance in the 100 MΩ to the 110MΩ Range with an accuracy of 0.01 to 0.05%. Since this instrument includes a high-sensitivity transistorized galvanometer and bridge power source, no auxiliary device is required. Superior resistor aliment Minimized contact resistance Guarding and shieldingMaterials of high insulation resistance and low absorption are employed. Guard circuits are provided to insure stable operation even In highly humid atmospheres. The instrument is housed in a {grey} metal case to assure -to operator of excellent shielding. Heat-insulated pushbutton keysIf the operator's body temperature were carried to the galvanometer sensitivity control keys, a temperature difference would arise at the contact point and produce thermal EMF resulting in measurement error. To eliminate this effect, the pushbutton keys for the galvanometer sensitivity control are heat-insulated with phenol resin.
Models 278610 and 278620 six-dial decade resistance boxes allow quick and easy setting of a wide range of resistance. These resistance boxes are used in combination with voltage or current standards to adjust voltage or current, as dummy load resistances or as an arm of AC bridges.
Model 2707 is a compact transistorized electronic galvanometer using a battery. With sensitivity of 10 µV/div., this instrument is highly suited to field measurements and as an indicator for complex measuring instruments. 10µV div. Sensitivity Stable measurement Zero drift as low as 1µV/h or 1µV/20°C 300 hours battery life Overload protection circuit
Model 2708 Galvanometer is a compact pointer type with a quick response (2 seconds). It employs a shock- and vibration-proof taut band suspension system. This unit is also suitable for classroom applications. 0.9 µA/div., 270 µA/div., sensitivity Quick response: 2 seconds Shock- and vibration-proof taut band suspension system Compact and lightweight (0.4 kg) Can be tilted to any desired angle with accessory stand
The 2406E Analog Insulation Tester: Analog models with two and three rating AC voltage measurement Automatic discharge Sky blue EL backlight Increased safety (covered battery charger)
The 2404 insulation tester is a reliable, hand-driven insulation tester using a DC-DC converter. The 2404 includes a number of useful and easy-to-use features.Six different models are available for different test voltages (DC) and MΩ ranges. With the exception of the 240415 and 240416, all models provide a convenient continuity range of 0 to 500Ω full scale. *This product is produced and handled by Yokogawa AMERICA DO SUL LTDA in Brazil. Please contact through your local Yokogawa's representative.
