You have 0 items in your cart.
TES-Taiwan
TES New
Sub Categories
Category:
Light Meter
Spectral Sensitivity close to CIE photopic Curve. Measuring Levels Ranging 0 to 400,000 Lux, 0 to 40, 000 fc. Accurate and Instant response. Data Hold function. MAX/MIN function. Peak Hold function. Relative function. Cosine Angular corrected. Auto-Power-Off function. CNS 5119 class11
Category:
Light Meter
Spectrum of photo sensor meets C.I.E. photopic curve V( l ) 16000 Records Data logging capacity USB interface (software included) Measurement of luminous intensity (PC Software)
Category:
Light Meter
Dual Display, 4-digit LCD reading. Spectral Sensitivity close to CIE photopic Curve. Measuring Levels Ranging 0.01 to 999900 Lux,0.01 to 99990 fc, Autoranging 5 step. Accurate and Instant response. Integral illuminance measurement. Luminous intensity measurement. Data Hold function. Data memory and read function. Reference value setting for relative or percentage deviation measurement. Ripple measurement for STRAY + LIGHT function. Time-hold function. Point - average function. Comparator function. Auto power off function. CNS 5119 Class Ⅱ .
Category:
Light Meter
Dual Display, 4-digit LCD reading. Spectral Sensitivity close to CIE photopic Curve. Measuring Levels Ranging 0.01 to 999900 Lux,0.001 to 92927 fc, Autoranging 5 step. Accurate and Instant response. Integral illuminance measurement. Luminous intensity measurement. Data Hold function. Data memory and read function. Data logger function. Reference value setting for relative or percentage deviation measurement. Ripple measurement for STRAY + LIGHT function. Time-hold function. Point - average function. Comparator function. Auto power off function. RS232 Interface. CNS 5119 Class Ⅱ.
Category:
Loop / PSC Tester
TES-1800A (230V) TES-1800B (110V) Large custom high contrast display. Auto lock out if test resister overheats. Voltage indication. Measure low loop with 0.01 W resolution. High loop range permit measurement of ground spikes. Microprocessor controlled.
Category:
Luminous Flux Meter
4-digit LCD reading. Spectral Sensitivity close to CIE photopic Curve. Auto ranging from 0.05 to 7000 lumens. Accurate and Instant response. Data Hold function. Data memory and read function. Zero function. Ratio function. Sort function. Comparator function. Best for measuring : LEDs, Small lamps, Fiber illuminators. Auto power off function. RS232 Interface. Easy to use. Adapters kit : 2/3/4/5/8/10m/m
Category:
Milli-Ohmmeter
Best resolution 1μΩ. Accuracy 0.05% 5A (120 mΩ) max. test current. Manual or Auto Range. (There are 6 ranges of current measurement, and furthermore 3 ranges in each current range.) Measurement of resistive and inductive materials (Two terminal measurement; Four terminal Kelvin measurement) Programmable Hi-Lo alarm with memory of 20 data. Auto-judgments of Hi (readings higher than Hi-Limit), Lo (readings lower than Lo-Limit) and Pass (readings between Hi-Lo Limits). Alarm (beeper) for Hi and Lo. Readings Hold function. Cable length measurement. The length unit can be selected between Meter (M) and Feet (FT). Resistance measurement results excluding cable resistances. Memory of 3,000 measurement data. Large LCD (5-digit) with backlight (users can choose to disable it). Rechargeable batteries and AC adaptor. Low battery (voltage) alarm. Low power consumption. Communicate with PC via RS232C (to USB bridge) cable. Application: various low-resistance (cables) measurement; contact resistance measurement, …etc.
Category:
Multimeter
0.5% Accuracy. Overload Fuse protection. Test Clips/Direct insert jack for easy measurement.