- Two types of gases: O2 (0-30% v/v range); combustibles (0-100%
LEL or 0- 5.0% v/v methane)
- Safety Yellow Instrument with integral concussion-proof boot.
- Alarm Indicators: Clearly advises alarm levels both audibly and
visually.
- Vibrator alarms: Pulses warning in all gas alarm conditions and
status alarms
- Lithium polymer rechargeable battery and charging adapter
- User-downloadable data logger
- Stainless steel alligator clip, interactive training CD, calibration cap,
manuals and quick reference card
- Full 2-year warranty including all sensors
 The continuous LCD shows simultaneous gas concentrations from 0-100% LEL (lower explosive limit, the standard way of monitoring the concentration of combustible gases).
 
 Alarming provides 95 dB alarm tone and bright wide-angled alarm bars and has an internal vibrating alarm for high noise areas. LCD Backlight: in alarm (auto) and on demand reactivation.
 
 The unit is powered by a lithium polymer battery with a typical run time of 14 hours. Recharge time is less than 3 hours.
 
 The unit is compatible with the MicroDock II automated docking test and calibration station. The monitor can also be purchased as part of a confined space kit which includes the combustible monitor, plus calibration gas, calibration accessories, flow regulator, hoses and tubing all bundled together in a convenient carry case.
 The COMBUSTIBLES (LEL/METHANE) GAS DETECTOR LEL combustible gas monitor is housed in a rugged, highly water resistant IP66/67 housing with built-in concussion-proof boot. Other features include an extra-loud audible alarm, flashing LED light bars and built-in vibrating alarm.
- Rugged, ultra-compact (4.2 x 2.4 x 1.4 in / 10.7 x 6.0 x 3.6 cm) and lightweight (5.6 oz. / 160 g)
 - Simple one-button operation
 - Standard datalogger (16 hours) and eventlogger (10 events)
 - Durable, stainless steel alligator clip
 - Integral concussion-proof boot for the most rugged environments
 - Continuous LCD shows continues 0-100% LEL or 0-5.0% Methane reading
 - Powered by a lithium polymer battery (run-time typically 14 hours;recharge in less than 3 hours)
 - Provides 95 dB alarm tone and bright wide-angled alarm bars
 - Equipped with internal vibrating alarm for high noise areas
 - Backlight: in alarm (auto) and on demand reactivation
 - Instant Low and High Alarm
 - Simple automatic calibration procedure
 - Fully compatible with BW's MicroDock II automatic test and calibration system
 - User selectable options include: confidence beep, latching alarm, calibration due date, bump due date, "SAFE" display function, multi-language, span concentration values, combustible sensor measurement selection (0-100%LEL or 0-5.0% v/v methane) and stealth mode
 - Full function self-test of: sensor, battery, circuitry and audible/visual/vibration alarms
 - Delivered ready for use with sensors, lithium polymer battey, stainless steel alligator belt clip, calibration hose/cap and instructions
 
| 
 Combustible measure range (methane, propane, butane, natural gas, etc)  | 
 0-100% LEL or  | 
| 
 Auto zero  | 
 Yes  | 
| 
 Calibration  | 
 Automatic  | 
| 
 Backlight  | 
 Low light (auto); alarm condition (auto); reactivation on demand  | 
| 
 Full function self-test  | 
 Sensor integrity, circuitry and battery; audible/visual alarms  | 
| 
 Sensor  | 
 Plug-in, electrochemical cell (toxic and oxygen); catalytic (LEL)  | 
| 
 User field options  | 
 Confidence beep, pass code protection, latching alarms, calibration due date, “SAFE” display function  | 
| 
 ALARM INDICATORS  | 
 Clearly advises alarm levels both visually and audibly  | 
| 
 Visual alarms  | 
 Two flashing alarm bars visable from all angles  | 
| 
 LCD indicates gas present and alarm levels encountered  | 
|
| 
 Audible alarm  | 
 Typically 95 dB at 30 cm variable pulsed audible alarm  | 
| 
 Vibrator alarm  | 
 Pulses warning in gas alarm conditions, or for any status alarms  | 
| 
 Other  | 
 Low battery, over range, multiple gas and missing sensor  | 
| 
 ALARM LEVELS  | 
 Instantaneous Low Alarm for all gases; instantaneous High Alarm for all gases;  | 
| 
 TWA (time weighted average) and STEL (short term exposure limit) for H2S and/or CO; OL (over limit alarm) for combustible gases  | 
|
| 
 LCD  | 
 Continuous, alphanumeric gas readout and status display advises:  | 
| 
 Gases monitored  | 
 H2S, CO, O2, combustibles (0-100% LEL or 0-5.0% methane)  | 
| 
 Gas concentration  | 
 Simultaneous and continuously displays gas concentration(s) present (in ppm, %LEL, or % v/v)  | 
| 
 TWA ppm or %  | 
 Records STEL and TWA exposures and displays on demand  | 
| 
 Peak ppm or %  | 
 Records and displays peak exposure to gas and displays on demand  | 
| 
 Alarm setpoints  | 
 Displayed on activation  | 
| 
 TESTS:  | 
|
| 
 Full function self-test  | 
 Full function self-test on activation  | 
| 
 Battery  | 
 Continuous  | 
| 
 GENERAL SPECIFICATIONS  | 
 Rugged, composite material with integral concussion-proof boot  | 
| 
 Operating temperature  | 
 -4 to 122 oF / -20 to 50 oC  | 
| 
 Humidity  | 
 5% to 95% RH (non-condensing)  | 
| 
 EMI/RFI  | 
 Complies with EMC Directive 89/336/EEC  | 
| 
 Ingress Protection  | 
 IP65  | 
| 
 Battery run-time  | 
 16-18 hours on two AA alkaline cells / 14-16 hours on two NiMH rechargeable cells  | 
| 
 Size  | 
 2.4 x 4 x 1.3 in. / 6 x 10 x 3.3 cm  | 
| 
 Weight  | 
 7.4 oz. / 211 g  | 
| 
 WARRANTY  | 
 Full 2 year warranty including all sensors  | 
| 
 DATALOGGER OPTIONS  | 
 User-downloadable datalogger  | 
| 
 Data recorder  | 
 All events and occurrences  | 
| 
 Sampling rate  | 
 Factory set at 5-second intervals and user-settable from 1 to 127-second intervals  | 
| 
 Storage  | 
 4.4 months of continuous data via 32 MB Flash MMC card (64 MB cards are also available); when full, the wraparound feature replaces oldest data with most recent data  | 
 

 